Weber Rescue Systems 1070692 страница 6 Скачать руководство пользователя

Страница: 6 / 48

Tips and recommendations

NOTE!

... highlights useful tips and recommendations, as well as

information for efficient, trouble-free operation.

1.3

Limitations of liability

All information and instructions in this operating manual have been compiled in keeping with

applicable standards and guidelines, the current state of technology, and our many years of

knowledge and experience.

The manufacturer assumes no liability for damage due to:

•  Failure to comply with the operating manual
•  Unintended use
•  Assignment of untrained personnel
•  Unauthorised modifications
•  Technical changes
•  Use of non-approved replacement parts
•  Use of non-original replacement parts

The actual scope of delivery can vary from the explanations and graphic

representations provided in this manual in the case of special versions

or due to technical changes.

1.4

All text, diagrams, drawings and images in this operating manual may be used without

restriction and without any prior approval.

Содержание 1070692

















































Результаты поиска

Содержание 1070692

Отзывы:

Похожие инструкции для 1070692

Бренды по названию

Популярные бренды

Weber Rescue Systems 1070692, Руководство по эксплуатации

Результаты поиска

Содержание 1070692

Отзывы:

Похожие инструкции для 1070692

Бренды по названию

Популярные бренды