5 Possible applications
5.1
Safety information
WARNING !
Never reach between the cutter arms!
WARNING !
During all work with the cutters, parts which are tensioned can break off or
be blown off and thus endanger personnel.
Uninvolved parties must therefore remain a safe distance away or stay in
the danger zone only as long as necessary.
5.2
Cutting
The devices‘ cutting capabilities can only be used optimally if they are placed as near
as possible to the blades‘ pivot point (Figure 1).
This means it may be necessary to readjust the device.
The device only achieves full cutting performance when the rocker lever is pressed all the way
through. In addition, it can take several seconds for the unit to reach full operating pressure.
Fig. 1
Fig. 2