2 Safety
This section of the operating manual provides a comprehensive overview of all the important
safety aspects for optimal protection of operating personnel, as well as for safe and trouble-free
operation.
Significant hazards can occur if the handling and safety instructions in this manual are not
complied with.
2.1
Intended use
The hydraulic cutters are designed and tested exclusively for the appropriate designated
purposes described here. All other activities are fundamentally prohibited.
Cutters
S 50, S 220-54, S 270, C 100-31, S 33-14, S 140-26 LIGHT, RSX 105, RSX 160, RSX 165-65,
RSX 180-80, RSX 175, RSX 185 ALL NINE, RSX 200-107, RSU 180 PLUS, RSU 210 PLUS
• All of the cutters are designed as one-man devices and may therefore
be operated by one person only.
• The devices serve exclusively for the cutting of doors and roof pillars,
posts and sills, the rims and spokes of steering wheels.
• The rear cutter section should be used whenever possible for separating
solid material as this is equipped with special round material cutters.
• In industrial applications the equipment can also be used for cutting pipes,
construction steel, profiles, sheets and cables.
