Webasto thermo top evo, Руководство по установке

Страница: 7 / 48

7
3 | Regulations For Installing In Vehicle
3.3.1
The fuel filler neck must not be located in
the passenger compartment and must
have a tightly fitting cap to prevent any
fuel leaks.
3.3.2
The type of fuel and the fuel filler neck
must be clearly identified on heaters for
liquid fuel, for which the fuel supply is
separate from the fuel supply for the
vehicle.
3.3.3
A sign must be affixed to the fuel filler
neck warning that the heater must be
switched off before refuelling. An
identical warning must also be included
in the manufacturer's operating
instructions.
3.4
Exhaust System
WARNING
Do not operate the heater in an enclosed
space, or one that does not have an ex-
haust extraction unit. Poisoning or
suffocation can result.
3.4.1
The exhaust outlet must be positioned in
such a way that exhaust fumes cannot get
into the interior of the vehicle through
ventilation devices, hot-air inlets or open
windows.
3.5
Combustion Air Inlet
3.5.1
The air for the combustion chamber of
the heater must not be extracted from
the passenger cabin of the vehicle.
3.5.2
The air inlet must be positioned in
such a way that it cannot be
obstructed by other objects.
3.6
Water Inlet
3.6.1
The supply of water to be heated must
be protected against freezing with a
suitable antifreeze additive to the
required strength as directed by the
manufacturer. The supply of water to be
heated must be uncontaminated by
corrosive compounds and other
impurities.
3.6.2
The inlet hose must be protected
from damage
.
3.7
Hot Water Outlet
NOTE
Failure to follow the installation instructions
and the notes contained therein will lead
to all liability being refused by Webasto.
The same applies if repairs are carried out
incorrectly or with the use of parts other
than genuine Webasto service parts. This
will result in the invalidation of the type
approval for the heater and therefore of
its homologation / type licence.