Webasto thermo top evo, Руководство по установке

Страница: 19 / 48

19
8 | Fuel Supply
When extracting fuel, ensure that it is not blocked
by check valves. In addition, make sure that the
standpipe sits approximately 1 in (25mm) off the
bottom of the fuel tank. This prevents the standpipe
from picking up debris while also ensuring the heater
never runs the vehicles fuel supply completely empty.
Refer to Fuel Standpipe on page Fig. 14]
To install the standpipe:
1 - bore a 25mm (1”) hole through top of fuel tank.
2 - remove sharp burrs and smooth edges with
emery cloth.
3 - determine length of standpipe when installed.
End should sit at least 25mm (1”) above tank bot-
tom.
Cut off excess standpipe at a 45-degree angle.
Remove burrs.
4 - loosely assemble items.
5 - place sealing compound on threads of item 2 and
thread into item 6. Tighten item 2 completely.
6 - slide standpipe into hole at angle. Slip one
shoulder of item 6, inside the hole as shown.
Fig. 16: Standpipe Installation – 2
8 - Center the standpipe in the hole in the fuel tank.
Fig. 15: Standpipe Installation - Illustration 1
7 - bring the standpipe up to vertical and insert the
opposite shoulder through the hole in the tank.
Fig. 17: Standpipe Installation – 3