Automatic sauna splash system, Sauna Plus 8
Index: 05 Change date: 11.09.2018
Operating instructions no.: BA DW 003-05 Sauna Plus 8 EN 24+230V.docx
Page 63 of 76
Clean the dirt filter
The dirt filter (2, Page
14
) in the supply pipe must be cleaned according to the
pollution level of the water network. This is particularly important directly after
commissioning and after maintenance work, as the pipes and the water are more
likely to contain dirt after assembly work. Close the ball valve (1) for this purpose,
unscrew the sealing plug of the filter, pull out the filter element, clean it under
flowing water and re-install it. Take care that the seal does not get damaged.
7.2
Regular water inspection
No water inspection is required when drinking water from the mains network is
used.
7.3
Fault removal / fault codes
HINT !
It is furthermore possible that the switches or sensors are faulty and
that it is therefore not possible to transmit an electrical signal.
Fault indications:
See the following fault table for removing the fault messages
Fault indication 1:
