Automatic sauna splash system, Sauna Plus 8
Index: 05 Change date: 11.09.2018
Operating instructions no.: BA DW 003-05 Sauna Plus 8 EN 24+230V.docx
Page 14 of 76
up before a splash. Setting see
Section 6.5.3, Menu for splash announ sauna
heater.
This setting is available when the heater uses the feature "Preheating".
Piping and fittings
The pipes of the automatic sauna splash system consist of a ball stop valve (8), a
dirt filter (7), and a safety unit combination (5) according to DIN EN 1717 to
ensure that water cannot be sucked back into the water supply system. The piping
further includes a solenoid stop valve (3) as well as a pressure switch (4) for
pressure monitoring.
Heater shower
The standard delivery scope includes a heater shower consisting of a stainless steel
pipe d18 x 200 mm with holes that distribute the water onto the heater stones.
The heater shower has a 3/8“ internal thread connection.
Wall feed-through (optional)
We offer different wall feed-throughs with 3/8“ thread connection made of
stainless steel for installation and safe attachment of the heater shower, see Section
3.1 Delivery scope / accessories.
Figure 5, Heater shower (standard)
Figure 4, Example of a wall feed-through for heater shower (optional)
