WDP ANGEL, Руководство оператора

Страница: 29 / 52

29
29
MINI-REGULATOR
SERVICE
ANGEL™ 4
MINI-REGULATOR SERVICE
The mini-regulator is a second stage regulator that is used to control the velocity and
regulate the gas pressure. It can be deleted only if a suitable first stage regulator is used
that incorporates a high flow and good regulation properties across the tank pressure
range. The thread interface is to ASTM industry standard form.
· Remove the macro line hose from the mini regulator by following the procedure
and warnings given in PROPELLANT AIR/NITROGEN SUPPLY - page 6.
· Remove the mini-regulator from the flash tank by screwing counter- clockwise.
· Remove the circlip using circlip pliers.
· Invert the mini-regulator body and tap it down firmly onto a smooth surface to
shock the internals out of the mini-regulator body.
· Ensure the large piston , Spring stack , small piston and the ball bearing
are removed.
· Inspect the O rings for damage and replace if necessary.
· Inspect the small piston face seal for damage and replace the whole small piston
if necessary.
· Inspect the large piston and small piston sealing faces for damage and
replace if necessary.
IMPORTANT NOTES: For re-assembly of components
· Due care and attention must be shown to ensure you do not score or damage
the bores within the mini-regulator body whilst performing maintenance.
· If the small piston or large piston seal faces are damaged they must be replaced
· We recommend that you lubricate the parts during re-assembly with Love Juice
Extreme GREASE™.
· Ensure the spring stack is in the correct order.
· Ensure the circlip is re-located correctly in the groove.
· Ensure you follow the procedure and warnings given in PROPELLANT
AIR/NITROGEN SUPPLY - page 6, when re-attaching the micro-line hose.
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
MAINTENANCE – MINI-REGULATOR SERVICE
• Ensure a barrel blocking device is fitted to the ANGEL™
• Ensure the hopper is removed from the ANGEL™
• Ensure that there are no paintballs in the ANGEL™
• Always remove the first stage regulator and relieve all residual gas pressure
from the ANGEL™ before disassembly.
• The ANGEL™ can hold a small residual charge of gas, typically 2 shots, with the
first stage regulator removed. Always discharge the marker in a safe direction to
relieve this residual gas pressure.
m
WARNING
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7
SERVICEABLE O-RINGS
SPRING STACK
ORDER
1 2 3 4 5 6 8 9 10 11 12 13 7
1 2 3 4 5 6 8 9 10 11 12 13 7