WDP ANGEL Скачать руководство пользователя страница 7

Страница: 7 / 52

OPTO™ BOARD / BOLT REMOVAL & ROTOR BREECH

ANGEL™ 4

OPTO™ BOARD

The ANGEL™ incorporates the OPTO™ board. This is the latest development in trigger

sensing function. It achieves unsurpassed advancements in trigger repeatability and

sensitivity, its non-mechanical switching results in faster, shorter and lighter trigger

strokes that give the user higher prolonged achievable rates of fire.

IMPORTANT NOTES:

· When accessing the Internal Tournament LED menus the OPTO™ board should

not be exposed to direct sunlight or strong external sources of light without the

grip cheek fitted as this light will induce a safety feature, that will prevent the

ANGEL™ from firing whilst it remains exposed to the strong external light.

· The OPTO™ board is a non-mechanical switch that is silent in its operation and no

audible click is present.

SOFT NOSE BOLT REMOVAL & ROTOR BREECH

The bolt is manufactured from aluminium and plastic with the wear surfaces being

plastic, this is to ensure – due to its high operating speeds – it does not seize within the

body. Eventually this will show signs of wear dependant on usage and its environment

of use.
It is important that that bolt is kept clean and free of dirt or grit as this will cause

accelerated wear. We recommend that you clean your bolt after each day of play.

· Ensure the ANGEL™ isolator switch is in the

OFF

position or the ANGEL™ is in SAFE

mode.

· Pull the Pull knob

and rotate 90 degrees

so that the knob remains in the

unlocked position.

· Swing out the Rotor Breech block

so that the bolt is exposed. The breech will

not open if the bolt is in the forward position. Ensure it is retracted by either:

momentarily gassing the ANGEL™ or pushing the bolt back with a squeegee.

· Extract the bolt

by pulling rearwards.

· To replace the bolt follow the stages in reverse order.

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

OPERATION

–

OPTO™ BOARD / SOFT BOLT REMOVAL & ROTOR BREECH

• Do not attempt to modify the OPTO™ board assembly in any way as this will

invalidate your warranty and could lead to safety concerns.

WARNING

ADHERE STRICTLY TO THESE

AND ALL OTHER SAFETY

INSTRUCTIONS AND GUIDELINES

• Do not fire the ANGEL™ with the breech open or without the bolt in the breech,

as high pressure gas will be admitted.

• Do not fire the ANGEL™ with the pull knob in the unlocked position.

WARNING

ADHERE STRICTLY TO THESE

AND ALL OTHER SAFETY

INSTRUCTIONS AND GUIDELINES

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11

1 2 3 4 5 6

8 9 10 11

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

1 2 3 4 5 6

8 9 10 11 12 13

Содержание ANGEL





















































Результаты поиска

Содержание ANGEL

Отзывы:

Похожие инструкции для ANGEL

Бренды по названию

Популярные бренды

WDP ANGEL, Руководство оператора

Результаты поиска

Содержание ANGEL

Отзывы:

Похожие инструкции для ANGEL

Бренды по названию

Популярные бренды