21
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.wayne-dalton.com
Tools Needed:
Tools Needed:
iNST
alla
Tio
N
Slide the nylon center bushing into the stationary
spring cone at the end of the spring and align the
stationary spring cone(s) with the holes in the center
bearing bracket. Secure the spring(s) to the center
bearing bracket with (2) 3/8”-16 x 1-1/2” hex head
bolts and 3/8”-16 nuts.
imPoRTaNT:
ThE SPRING WARNING TAG(S)
SUPPLIED MUST BE SECURELY ATTAChED TO ThE
STATIONARY SPRING CONE IN PLAIN VIEW. ShOULD A
REPLACEMENT SPRING WARNING TAG BE REqUIRED,
CONTACT WAYNE-DALTON CORP. fOR fREE
REPLACEMENTS.
21
Nylon center bushing
Torsion
spring
(1) 3/8”-16 x 1-1/2”
hex head bolt
(1) 3/8”-16 Nut
(1) 3/8”-16 x 1-1/2”
hex head bolt
(1) 3/8”-16
Nut
Center bearing bracket
Torsion
spring
Torsion spring
Nylon center
bushing
Center bearing
bracket
Spring warning
tag
Stationary
spring cone
Stationary
spring cone
Step Ladder
Torsion
spring
Spring
warning
tag
counterbalance cables
Vice Grips
3/8” Wrench
Step Ladder
Thread the counterbalance cables around the back
side of the left cable drum and verify that there is no
cable obstructions. hook the cables into the drums.
Slide the left hand cable drum against the left hand
end bearing bracket and tighten the set screws in
the drum to 14-15 ft. lbs. of torque (Once set screws
contact the tube, tighten screws one full turn). Rotate
the left hand drum and torsion tube until cable is
taut. Attach vice grips to torsion tube and brace vice
grips against jamb to keep cable taut. Slide the right
hand cable drum against the right hand end bearing
bracket and rotate drum until cable is taunt. Tighten
set screws in right hand cable drum.
imPoRTaNT:
ChECk EACh CABLE, MAkING SURE
BOTh ARE SEATED PROPERLY ON ThE CABLE
DRUMS AND hAVE EqUAL CABLE TENSION.
22
Left end
bearing
bracket
Cable in
position
Set
screws
Vice
grips
jamb
Left cable
drum
Left cable drum
Cable
Torsion
tube
Cable
hooked in
cable drum