![background image](http://html1.mh-extra.com/html/wayne-dalton/8124/8124_installation-instructions-and-owners-manual_3975075003.webp)
3
Please Do Not Return This Product To The Store.
Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the
Find a Dealer
section online at
www.wayne-dalton.com
Right & left
Cable Drums
(1) Center bracket
(1) Center bracket
bushing
Right and left
counterbalance cables
Right & left torsion
springs (as required)
End bearing bracket
Stud plates
(as required)
Package contents
(1) Torsion tube
Door sections (as required)
Short and long stem rollers
(As required)
Weather seal & nails
(if included)
Torsion Spring
Installation Instructions and Owner’s Manual
8024 AND 8124 WINDLOAD
IMPORTANT NOTICE!
Read these instructions carefully before
attempting installation. If in question about
any of the procedures, do not perform the
work. Instead, have a qualified door agency
do the installation or repairs.
Copyright 2007 Wayne-Dalton Corp.
Part No. XXXXXX - PRELIMINARY
New 07/16/2007
U-Bar’s
(as required)
Manual
#6 Screw eye and
pull rope
(if included)
(2) Vertical
Rh/Lh tracks
(2) horizontal tracks Rh/Lh
NoTe:
DEPENDING ON ThE DOOR MODEL, SOME PARTS LISTED WILL NOT BE SUPPLIED If NOT
NECESSARY. REAR SUPPORTS MAY OR MAY NOT BE INCLUDED WITh YOUR DOOR.
Slotted jamb brackets
(as required)
Top bracket assemblies
(as required)
(2) fully adjustable
Rh/Lh flagangles
Left and right bottom
brackets (as required)
Pushnuts
(as required)
(2) Lift handles &
spacers
Extension brackets
(as required)
(2) Roller spacers
(2) Step plates
#1, #2, #3, #4, &
#5 Wide hinges
(as required)
1
Left and right bottom
brackets (as required)
#1 Narrow hinges
(as required)
horizontal angles Rh/Lh
(as required)
(1) Windload label
(1) Miami-dade
label