830873-0001 REV 02/20/2023
©Copyright 2023 Wayne Dalton, a division of Overhead Door Corporation
16
Final Door Install (continued)
16. TEST PROCEDURES
GENERAL INFORMATION
The Operator is intended for use on rolling doors. All models are normally-energized fail-safe operators incorporating internal batteries and proprietary
control circuitry. All comply with UL864. The operators respond to emergency conditions generated by manual or automatic initiating devices and shall be
installed in accordance with NFPA and UL864 standards.
The available operator features include patented annual test standard compliance technology, test plate interface, selectable time delays, minimum 24 hour
battery support for release and smoke detectors, form-C relay outputs, notification appliance and troubleshooting capabilities.
The fail-safe design incorp rates an annual internal clock/calendar which generates a test trouble signal if the system has not been tested within 365 days per
National Fire Code requirements.
CAUTION
Review all installation instructions, procedures, cautions and warnings contained within this manual prior to installing and/or servicing this product. As with all
releasing device systems, maximum fire protection is provided when installed in accordance with factory specifications and used with fuse link systems.
CAUTION
Fail-safe operation can only be provided once input power has been applied. Do not install this unit without factory training.
WARNING
To prevent possible serious injury or death, keep the door opening clear of all personnel. RSX® FDO operated Storm Shelter doors could drop at any time.