Wavetronix Click 516, Руководство пользователя

Страница: 17 / 19

16
CLICK 516
• USER GUIDE
Figure 10 – Simple 516 Tab
The Timezone field is the only field that is not available when using the Simple driver.
Reset (Red Flashing)
The red flashing mode resets the Click 516 to factory defaults. If a device is not responding
and not communicating, resetting the device may fix the problem. Once in reset mode, use
submenu 1 (yellow LEDs) to select which level of settings should be reset:
˽ First LED Solid – Reset all settings except Serial Number and XML variable map.
˽ Second LED Solid – Reset all settings except Serial Number.
After being reset, the Click 516 will return to the last mode that it was in.
In the event that you need to upload a new firmware file to the Click 516, the following steps
should be followed:
1
Load the new firmware using the Rabbit Field Utility.
2
Power-cycle the Click 516.
3
Reset the Click 516 to factory defaults using the Second LED solid option.
4
Copy over any new driver files to the “Drivers\516” directory. Make sure these files are
NOT read-only.
5
Connect with Click Supervisor.