Wavetronix Click 516, Руководство пользователя

Страница: 16 / 19

CLICK 516
• USER GUIDE 15
Figure 9 – Settings Tab
The Sensor tab presents the following settings:
Setting Description
SensorID This is the ID of the Sensor the Click 516 is connected to. This field is read
only.
Sensor Units This displays what units the Sensor is set to. It will be either Standard or
Metric. This field is read only.
Interval Length This is the number of seconds that the sensor is storing Interval Data. This
field is read only.
Time Zone Allows you to select the appropriate time zone.
Table 3 – Description of Sensor Tab
Note
If any of the read only fields are blank it means that the Click 516 has not read the
data from a SmartSensor HD. This could be caused by having the wrong port set up
on the Click 516. The sensor not running at 9600 BAUD or it might be that you just
need to but the Click 516 in run mode. The read only fields are only filled in when the
Click ! 516 is in run mode.
Simple Driver
The Simple driver only has the following information: