4-18
The Edit Limits function works in conjunction with the performance
of an Auto Test. As the Auto Test measurements are made, the
values are compared to the above limits. Use the
Up
and
Down
arrow
soft keys to select the limit to be edited. Use the numeric entry keys
or the
UP
and
DOWN
arrow keys to enter a value. Once the value
has been entered, press the
ENTER
key to update the display. The
Set for FCC soft key can be used to automatically set the limits for
FCC specified values.
Copy Remote Plan
This selection allows you to copy a channel plan from one unit to
another.
Connect a cable between the serial ports of two units. Ensure that
the baud rate is set the same for each unit (General Setup screen). A
baud rate of 19.2K is recommended for copying plans.
Select
Copy Remote Plan
from the menu and press the
ENTER
key.
A list of plans located in the remote units memory will appear. Select
the plan that you want to copy and press the
Copy
soft key. The
selected plan will be transferred from the remote unit and stored in
the unit that you are operating. It will also become the active plan.
