The software editor
page 13 of 30
Transfer
In the Transfer area you will find the
Device selection field. All WaveUs
that are connected to your computer
are displayed here. Use the selection
box to choose the WaveU that you
want to write to.
You will also find the Send Card but-
ton here, which you can use to trans-
fer your compilation to your WaveU. The progress bar at the bottom in-
forms you about the progress of the transfer.
Knobs
You can operate each knob in several ways.
You can click on it with the
left mouse button
and move the mouse up or
down. The knob moves in fine steps. To make larger steps hold down the
CTRL key
.
Alternatively, you can use the
mouse wheel
. Move your mouse pointer
over the slider and turn the mouse wheel for small steps or press
CTRL
for
large steps.
You can also simply click on the numerical value below the slider and en-
ter the desired numerical value directly.
[ This page is blank for formatting reasons ]
Содержание WaveU
Страница 1: ......
