The software editor
page 12 of 30
General area
Here you can change the
name of the
card
as it is displayed in the U, as well
as the
name of the tone
. You can also
set the
Tone Type
and the
Velocity
Curve for Voice 1 and 2
using the
drop-down fields.
The
Velocity Threshold
knob can be
used to set the threshold value of the
velocity between Voice 1 and 2, espe-
cially for the Tone Type Velocity
Switch. If e.g. 64 is set as Threshold,
all velocities up to 64 Voice 1 and all
velocities from 64 Voice 2 will be
played.
The
Voice Ratio
knob determines the ratio between Voice 1 and Voice 2
for tones with two voices.
Play button
Press Play to preview the currently selected sample. Alterna-
tively, you can press the space bar.
Card-Info
Here you will always see information
about the size of the compilation.
Note that you must not exceed a
size of 512kb. 12288 bytes are basically occupied by the card format.
Tones list
All tones listed here are subsequently available as
a tone within a timbre in the U.
Use the Plus (+) button to add a new, empty tone
to your list.
Select an instrument and press the Minus (-) button
to delete the tone from the list.
Mark an instrument and use the arrow keys on the
right side of the list to change the arrangement of
the instrument within the list.
128 tones can be created per card. The list is
therefore limited to 128 tones.
Содержание WaveU
Страница 1: ......
