NORMAL POWER DOWN PROCESS
Press and hold the power button down for approximately 3 seconds to power down the Hub.
The green LED on the Power Button will turn off. Depending on the system software version
installed in your w10, it may sound a tone and the Strobe will light in a pattern during the shut
down process.
* Your actual battery life may vary depending on system alerts, notifications and environmental factors.
LEA MANAGEMENT APP
The LEA Management App is a simple to us app that enables you to monitor the status
of LEA, the Lifeguard Tags and other accessories. The app may be used on desktop
computers, laptops, smartphones and tablets (recommended).
Note: Although recommended, it is not necessary to have the LEA app open or active
while using LEA. The system will monitor your guards using the most recent settings.
SETTING UP THE APP
1.
Power on LEA and allow the Hub to fully complete the Start Up Process.
2.
A
one-time reboot
is necessary to access the Management App
3.
To reboot, press the Power Button for 3 seconds (or until the green LED turns off). It
will take about 90 seconds for the unit to completely power off.
4.
Once off, turn LEA back on by pressing the Power Button. After the Strobe changes
a breathing pattern, the LEA is ready to connect.
5.
Open your device’s web browser program (Chrome, Safari, etc.).
6.
To access the Management App open the WAVE Management App and enter your
serial number found on the back of your LEA Hub
Note: Your device must have WiFi activated and be on the WAVE wireless network to
connect to and manage LEA. Depending on how your device is configured,
its access
to the Internet may be interrupted while on the WAVE network.
WAVE LEA System User Guide v0922-1.0
Page of
9
24
