IMPORTANT. Do not subject the Hub to direct water spray or submerge it in
water. Move the unit inside or under cover
during extreme or inclement weather.
TESTING THE LEA SYSTEM BEFORE USING
In most instances where you decide to place your LEA Hub out of convenience will
likely work. However it may be necessary to relocate the unit to a better spot to insure
complete coverage of the water. To confirm that you have selected an acceptable
location it is necessary to perform the following simple test.
IMPORTANT. Always perform this test when using the LEA system for the first time
at a new, recently renovated or modified swim area. Always make sure that you are
testing with ENABLED Lifeguard Tags (see MANAGING TAGS).
1.
(Optional) Use the LEA Management App to select settings for this test such as
lowering the volume of the speaker or reducing the
maximum time selected for
Entry Alerts
. Remember to change the settings back after the test.
2.
With the system on, walk (or swim) to different areas in the water with an active
Lifeguard Tag. It is not necessary to submerge the wearable. As long as the system
does not alert, the area you are in is within coverage of the system. See below for
more details.
3.
Continue this process until all general areas of the water are tested.
WAVE LEA System User Guide v0922-1.0
Page of
20
24
