You may check the battery status and functionality of Lifeguard Tags at any time by
using the LEA Management App (refer to the instructions above).
At the time of this writing there are two different model versions of the Lifeguard Tag:
ROUND-STYLE
The two halves of the “round-style” Lifeguard Tag are magnetically attracted to each
other. To wear, simply place one half under the user’s clothing (eg bathing suit) and the
other half on the outside of the user’s clothing. Magnetic force should keep the two
halves securely held during most activities.
Optionally, the included Lanyard Adapter may be used. Separate the two halves and
mount the Lanyard Adapter as depicted. It will be held in place by the magnetic force
of the Tag’s two halves.
CLIP-STYLE
This style clips onto the edge of the user’s clothing. Squeeze the edge area as depicted
to open the clip to attach. The clip is further secured in place by magnetic force
between each half.
Optionally, the included Lanyard Adapter may be used. To install, use a paper clip or
similar to remove the hinge pin and separate the two halves. Mount Lanyard Adapter
as depicted and re-install Hinge Pin.
WAVE LEA System User Guide v0922-1.0
Page of
18
24
CLOTHING
LANYARD ADAPTER
LANYARD ADAPTER
HINGE PIN
