background image

LIMITED WARRANTY / LIMITATION OF REMEDY:
What is covered? 

Watts Heating & Hot Water Solutions warrants to the original purchaser 

only, that the product it manufactured when used as intended and instructed, is free from 

defects in materials or workmanship for five year warranty from date of shipment to the 

original purchaser.

What is not covered? 

This Limited Warranty does not cover or is voided by (a) any 

product, components or parts not manufactured by Watts Heating & Hot Water Solutions, 

(b) faulty or improper installation or unsuitable installation environment, (c) failure to follow 

instructions or warnings, (d) problems caused by unauthorized attachments, modification, 

repairs or parts, (e) negligence or vandalism, (f) problems due to foreign material, adverse 

or improper water conditions, chemicals, contamination, improper pH, water treatment 

activities or products, mineral deposits, or decomposition by galvanic action, (g) shipping 

defects or damage, (h) normal wear and tear, (i) any abuse, misuse, unintended use, 

failure to maintain or inspect, (j) any circumstances over which Watts Heating & Hot Water 

Solutions has no control. 

IN NO EVENT SHALL WATTS HEATING & HOT WATER SOLUTIONS BE LIABLE 

TO BUYER OR THIRD PARTIES FOR ANY GENERAL, SPECIAL, INCIDENTAL, OR 

CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, PROPERTY 

DAMAGE, PERSONAL INJURIES, LOST PROFITS, LOSS OF SAVINGS OR REVENUE, 

LOSS OF THE USE OF THE PRODUCT OR ANY ASSOCIATED PRODUCTS, COST OF 

REPAIR, COST OF ANY SUBSTITUTE PRODUCTS OR SERVICES, DELAY DAMAGES, 

LABOR CHARGES, FINES/ PENALTIES, ECONOMIC OR NON-ECONOMIC LOSSES, 

ARISING DIRECTLY OR INDIRECTLY FROM THE SALE/PURCHASE, OWNERSHIP, 

INSTALLATION, OR USE OF THE PRODUCT, WHETHER BASED ON BREACH OF 

WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR ANY 

OTHER LEGAL THEORY. 
What will Watts Heating & Hot Water Solutions do? THE SOLE AND EXCLUSIVE 

REMEDY UNDER THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTIES, is: 

Within a reasonable period of time after receiving a timely and bona fide claim, Watts 

Heating & Hot Water Solutions will at its sole option (a) repair the product, or (b) replace the 

product (or component) with a same or similar product. A replaced product is warranted 

for 90 days from the date of return shipment, or for the balance of the original Limited 

Warranty period, whichever is longer. 

IN NO EVENT SHALL WATTS HEATING & HOT 

WATER SOLUTIONS LIABILITY EXCEED AN AMOUNT EQUAL TO THE SALES PRICE 

OF THE PRODUCT.
To obtain warranty service: 

Contact Watts Heating & Hot Water Solutions at  

(800) 433-5654 (opt. 3) with description of the problem and proof of the date of original 

purchase. Cost of shipping and insuring returned product must be paid by purchaser.  

Watts Heating & Hot Water Solutions is not responsible for any loss of damage to the 

product incurred during shipping. 

Disclaimer of other warranties: THIS LIMITED WARRANTY IS IN LIEU OF ALL 

OTHER WARRANTIES, EXPRESS OR IMPLIED. ALL IMPLIED WARRANTIES, 

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE, ARE DISCLAIMED.

Heating & Hot Water Solutions

Содержание Lync DigiTemp Jr V23






























Отзывы: