manualshive.com logo in svg

Watts Lync DigiTemp Jr V23, Руководство пользователя/Инструкция по эксплуатации

Поделиться
Скачать
Watts Lync DigiTemp Jr V23 Скачать руководство пользователя страница 26

47

46

Code Description

Resolution

Control Behavior during 
Error Condition

1

NVM Error

Verify settings in applicable menu and / or load 

defaults.

Valve closes and opera-

tion ceases.

2

Mixed Outlet  

Sensor Error

Check the sensor wiring. Sensor may need to 

be replaced.

Valve closes and opera-

tion ceases.

3

High Temperature 

Alert

Check valve position. Considering increasing 

corresponding differential setting.

Operation continues.

4

Low Temperature 

Alert

Check valve position. Considering increasing 

corresponding differential setting.

Operation continues.

Replacement Part Numbers

Error Codes 

If the control detects a problem, an error will display on the Home screen and from within the 
“Toolbox” menu. To navigate to the “Toolbox” menu unlock the control and select “Toolbox”. 
 Resolution is in the chart below.

Scheduled Testing, Inspection and Maintenance

Testing/Inspection 

WARNING

!

Need for Periodic Inspection/Maintenance:

 This product must be 

tested periodically in compliance with local codes, but at least once per year 

or more as service conditions warrant. All products must be retested once 

maintenance has been performed. Corrosive water conditions and/or unauthor-

ized adjustments or repair could render the product ineffective for the service 

intended. Regular checking and cleaning of the product’s internal and external 

components helps assure maximum life and proper product function. 

Maintenance 

 

■

Actuator and/or Valve Removal

 

■

Actuator Removal Instructions

Valves and actuators are not field serviceable. They must be removed and replaced. 

NOTICE

BEFORE attempting to open Control 
Module, a certified and qualified electri-
cian MUST fully de-energize and discon-
nect all electrical power from DigiTemp.

Perform required LOCK OUT/TAG OUT 
procedures.

When done, reconnection and reenergiz-
ing of DigiTemp

 

MUST

 

be performed by 

certified and qualified electrician.

DANGER

!

Tools Required: 

  •   10mm and 3/8" sockets, elbow and torque wrench. Not required if replacing both valve and actuator
  •   T30 Torx driver. Not required if replacing both valve and actuator
  •   2.5mm Allen key. Not required if replacing both valve and actuator
  •   1/8" (3.2mm, #2) slot screwdriver. Not required for valve only replacement
  •   Wire Stripper and snips. Not required for valve only replacement
  •   AC Voltmeter. Not required for valve only replacement
  •   Five to ten 4" zap straps (cable ties)
  •   4" monkey wrenches (gas grips) 
  •   3" adjustable wrenches (shifting spanner) 
  •   Teflon Tape. Not required for actuator only replacement

Replacement Part#

Description

160775

Kit, Lync Mixing Valve and Actuator Kit DigiTemp      

¾

"       3-Way Model V23

160778

Kit, Lync Mixing Valve and Actuator Kit DigiTemp      1"        3-Way Model V55

160781

Kit, Lync Mixing Valve and Actuator Kit DigiTemp      1 

½

"    3-Way Model V71

160784

Kit, Lync Mixing Valve and Actuator Kit DigiTemp      2"        3-Way Model V125

160787

Kit, Lync Actuator DigiTemp

160790

Kit, Lync Temperature Sensor DigiTemp High Speed with Wire

160793

Kit, Lync DigiTemp Controller

Содержание Lync DigiTemp Jr V23






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды