background image

3

2

Attention Owners and Users

Thank you for purchasing the 

Watts Heating & Hot Water Solutions DigiTemp

®

 Jr

. This equipment will 

provide safe and productive operation as long as it is installed, set up, used, and serviced in accordance 
with the instructions in this manual and is properly maintained. Owners and users of this equipment have 
the responsibility to make certain that this equipment is used properly and safely. To avoid the possibility 
of death, serious personal injury, property damage, or damage to the equipment, owners should not permit 
anyone to touch this equipment unless they are over 18 years of age, are adequately trained and supervised, 
and have read and understand this manual. Owners should ensure that no unauthorized personnel come in 
contact with this equipment.

READ THIS MANUAL

 carefully, learn 

how to install, set up, use, service 
and maintain this equipment  
correctly, and strictly follow all 
safety information and instructions 

contained in this manual and on the equipment, 
as well as any requirements of local, state, and 
federal law. Failure to do so could result in death, 
serious personal injury, property damage, or  
damage to the equipment. This manual should be 
considered a permanent part of the DigiTemp

®

 Jr. 

and be kept available for easy reference by any 
user. 
If this equipment, or any of its parts, becomes 
damaged or needs repair, stop using the  

equipment and contact an experienced service 
individual immediately. If the product labels  
or this Manual are misplaced, damaged or  
illegible, or if you require additional copies,  
please visit watts.com.
Please remember that this manual and the product 
labels do not replace the need to be alert, to  
properly train and supervise users, and to use 
common sense when using this equipment. 
If you are ever uncertain about a particular task 
or the proper method of operating this equipment, 
ask your supervisor, consult this manual, visit 
our website, or contact your local sales  
representative.

Product Identification

Please record your product’s identification and purchase information which will help in the event you have  

questions or need any service.

Understanding Safety Information 

This safety-alert symbol is shown 
alone or used with a signal word 
(DANGER, WARNING, or CAUTION), 
a pictorial and/or a safety mes-
sage to identify hazards and alert 
you to the potential for death or 
serious personal injury.

Identifies hazards which, if not 
avoided, will result in death or 
serious injury. 

Identifies hazards which, if not 
avoided, could result in death or 
serious injury. 
  
Identifies hazards which, if not 
avoided, could result in minor or 
moderate injury. 
  
Identifies practices, actions, or 
failure to act which could result in 
property damage or damage to the 
equipment.

•  Read the manual and all product 

labels and follow all safety and other 

information.

•  Learn how to properly and safely use 

the equipment BEFORE installing,  

set up, using, or servicing.

•  Keep the manual available for easy 

access and future reference.

•  Replace missing, damaged, or  

illegible manual and product labels.

•  Replacement manuals available at 

watts.com

This pictorial alerts you to the 
need to read the manual.

This pictorial alerts you to  
scalding, burn and hot water 
hazards. 

This pictorial alerts you to burn 
and hot surfaces hazards.

This pictorial alerts you to  
electricity, electrocution, and 
shock hazards. 

This pictorial alerts you to the 
need to perform appropriate Lock 
Out/ Tag Out procedures. 

WARNING

!

CAUTION

!

NOTICE

DANGER

!

!

WARNING

!

TO AVOID DEATH, 

SERIOUS PERSONAL 

INJURY, PROPERTY 

DAMAGE, OR DAMAGE 

TO THE EQUIPMENT:

Reading & Understanding the Manual

Important Safety Information

  Model:

  Date of purchase:

  Seller name / address:

Содержание Lync DigiTemp Jr V23






























Отзывы: