UK
ENGLISH
V - COMMISSIONING AND PROGRAMMING
Setting the date and time
The display activates when power is turned on.
After around three seconds, the language selection screen appears.
You can also change your selection later in the “Languages” section of the
Parameter
menu.
Once your language selection has been confirmed, the display switches to the date and
time setting screen.
Set the date, time and format
using the arrow keys and confirm by pressing
Home screen
Main screen
IMPORTANT:
if no keys are pressed, after 2 minutes the display reverts to the Home
screen. Press the key once to display the 5 icons at the bottom of the screen.
Setting the mixed water temperature
For this setting, it is imperative to simulate normal use by running water through the
draw-off points to ensure the mixed water temperature is set correctly.
Note: draw-off points fitted with anti-scald cartridges will prevent water flow if the mixed
water temperature is set above 48 °C.
Date/Hour
01/01/16 12:00
mm/dd/yy 12H
dd/mm/yy 24H
Date/Hour
01/01/16 12:
00
mm/dd/yy 12H
dd/mm/yy 24H
Thu 21/07/16
17:11
67.3
°C
Mixed Water
Temperature
Loopback 64,1°C
Normal
SD
Langues
1
English
2 Français
3 Deutch
4 Nederlands
5 Español
6 Italiano
16
ENGLISH
EN
