AM Series Boiler & Water Heater User Manual
CHAPTER 3: INSTALLATION
– SITE
OMM-0100_E
•
GF-146
•
11/15/2019
Technical Support
•
(800) 526-0288
•
Mon-Fri, 8 am - 5 pm EST Page 34 of 170
3.10.1 Transporting a Standard AM Unit
Transport a
standard
AM boiler or water heater to its installation location as follows.
Transporting a
Standard AM Water Heater or Boiler
1.
Remove the lower cover
“A” at front of the AM unit by pulling it off.
2.
Remove the screw & washer
“B” (Figure 3-4), which fastens the pallet to the unit front.
Figure 3-4: Removing the Unit Front from Wood Pallet
3.
Remove the screw and washer
“C” (Figure 3-5), which fastens the pallet to the unit rear.
Figure 3-5: Removing the Unit rear from Wood Pallet
4.
Install th
e two factory supplied eyebolts “D” on the upper side of the unit and attach chains
or straps to lifting ring/hook
“E” as shown in Figure 3-6.
Figure 3-6: Removing the Unit from Wood Pallet (Lifting)
A
E
C
D
B
