Parameter
630 default
Output 2
Direction
Output 2 - status
High = CW
Output 3
Auto/man
Output 3 - status
High = auto
Output 4
General alarm
Output 4 - status
High = alarm
The pump is now ready to operate according to the defaults listed above.
Note: The display background colour changes according to running state as follows:
l
White background indicates pump stopped
l
Grey background indicates pump running
l
Red background indicates error or alarm
All operating parameters may be changed by means of key-presses (see section
).
If the Auto restart feature is enabled it may cause the pump to start as soon
as power is turned on.
Auto-restart only affects operation of manual mode, network mode and
memodose mode.
If Auto restart is enabled the "!" Symbol is shown on the screen to warn users
that the pump may operate without any manual intervention (pump resumes
with previous settings).
Do not use auto restart for more than 12 times in 24 hours. We recommend
remote control where a high number of starts is required.
If the pump is configured to network mode or analog mode it will respond to
remote commands at any time including immediately after power on. The "!"
Symbol is shown on the screen to warn users that the pump may operate
without any manual intervention (e.g. a remote setpoint could start the pump
with no key press required).
50
m-630bpn-en-08
Содержание 630 Bp
