Waterstage WO A060LDC Series, Инструкция по установке и эксплуатации

Страница: 46 / 72

Line Function Setting range
or display
Setting
increment
Basic
setting
800
S
Reduced setpoint increase start -30... 10 °C 1 °C
--
801 S Reduced setpoint increase end -30... 10 °C 1 °C -5 °C
830 S Mixer valve boost 0 50 °C 1 °C 0 °C
834 S Actuator running time 30... 873 s 1 s 240 s
850 I Floor curing function ( figure 44 ) Off
- Off: Early interruption of the current programme, programme inactive.
- Operational heating.
- Heating ready for occupation.
- Operational h ready heating.
- Ready h operational heating.
- Manual: Manual mode enables you to programme your own concrete slab drying time.The function ends
automatically after 25 days.
"
Please comply with the
standards and instructions
of the manufacturer of
the building ! A good
performance of this function
is only possible with an
installation correctly
implemented (hydraulic,
electricity and adjustments) !
This function can be stopped
by anticipation when setting
the adjustment on "Stop" .
50
45
40
35
30
20
5 0
25
55
1 1 5 7
X
10
18
25
15
1
figure 44 - Diagram of the concrete slab drying programmes
Heating flow temperature °C
Operational h Heating ready for occupation
Heating ready for occupation
Day
Operational
heating
851
I
Floor curing setpoint manually
(if line 850 = manual)
0 95 °C 1 °C
25 °C
This function enables you to set the custom concrete slab drying temperature. This temperature remains fixed.
The concrete slab-drying programme stops automatically after running for 25 days.
856 I Floor curing day current 0 32
857 I Floor curing day completed 0 32
900 S Operating mode changeover None, Protection mode,
Reduced, Comfort, Automatic
1 Reduced
Operating mode at end of concrete slab drying period
Installation and operating manual "1585 - EN"
Air to Water Heat Pump (Split integrated DHW type)
- 46 -