Waterstage WO A060LDC Series, Инструкция по установке и эксплуатации

Страница: 22 / 72

2 .7 .3 Additional charge
The charge in the outside units corresponds to the maximum distances between the outside unit and the hydraulic
module defined in page 18 . For some distances, an additional charge of R410A is required. The additional
charge depends on the distance between the outside unit and the hydraulic module for each type of appliance.
The additional charge of R410A must necessarily be made by an approved refrigeration engineer.
e 5, 6 (Outdoor unit WOYA060LDC)
7.5m < Length of the connections ≤ 15m 15m < Length of the connections ≤ 20m
[0.03 x (Length of the connections - 7.5) + 0.175] x 1000 = g [0.02 x (Length of the connections - 15) + 0.4] x 1000 = g
If the temperature control set on the hydraulic module is less than or equal to 0.4, an additional charge must be
added from 5m refrigerant piping according to the formula: 0.03 x (length of the connections - 5) + 0.1.
Length of the
connections m
8 9 10 11 12 13 14 15 16 17 18 19 20
Charge g 1290 1320 1350 1380 1410 1440 1470 1500 1520 1540 1560 1580 1600
e 8 (Outdoor unit WOYA080LDC)
7.5m < Length of the connections ≤ 20m
[0.02 x (Length of the connections - 7.5)] x 1000 = g
Length of the
connections m
11 12 13 14 15 16 17 18 19 20
Charge g 1470 1490 1510 1530 1550 1570 1590 1610 1630 1650
e 10
(Outdoor unit WOYA100LDT)
7.5m < Length of the connections ≤ 15m 15m < Length of the connections ≤ 20m
[0.04 x (Length of the connections - 7.5)] x 1000 = g [0.05 x (Length of the connections - 15) + 0.3] x 1000 = g
Length of the
connections m
10 11 12 13 14 15 16 17 18 19 20
Charge g 1900 1940 1980 2020 2060 2100 2150 2200 2250 2300 2350
Installation and operating manual "1585 - EN"
Air to Water Heat Pump (Split integrated DHW type)
- 22 -
Comfort 5, 6
Comfort 8
Comfort 10