2
1
5. PROGRAMMING
AND SPECIAL FEATURES
5.1
PROGRAMMING INSTRUCTIONS
One of the features present in the WL7 FW is the maintenance screen (see below).
To access the screen, choose the ambient dispensing icon and press 5 times for 5
seconds.
This screen allows to check the settings of the machine:
• Filter timer (factory setting: OFF);
• Energy saving mode (factory setting: ON);
• Hot water setpoint (factory setting: 87°C);
• Extra hot water setpoint (factory setting: 95°C).
But also allows you to see/do:
• Errors the machine is experiencing;
• Type of UV sensor present;
• Reset the filter timer;
• Reset bottles saver counter.
To change the factory settings, follow the instructions below:
ON
ON
ON
1 2
1 2
1 2
ON
ON
1 2
1 2
Remove the panel [14] by taking screws in
the back and front with the front door open.
PCB located inside
the machine
On the upper part of the machine you will
see the PCB with
red
DIP switches.
29
ENG2036-16/01/19
14
Содержание WL7
Страница 1: ...WL7 FIREWALL Technical Manual ...
Страница 33: ...33 ENG2036 16 01 19 6 SCHEMATICS ...
