WaterLogic WL7, Техническое руководство

Страница: 22 / 47

22
INSTALLATION INFORMATION
ENG2036-15/01/19
as
as
4. SERVICE PROCEDURES
A service every six months is important to keep the machine in perfect working condition
and to ensure the best water quality possible.
The service is composed of the following tasks:
• Check the correct operation of the machine - Verify if every function is operational and
the water temperatures and pressures are correct; the machine is not damaged or with
strange noises/vibration.
• Descale the machine (for models equipped with hot tank).
• Sanitise the machine (previously on chapter 3.2).
• Change the filter(s)*.
• Change the UV lamp.
• Surface cleaning: these machines dispense purified water and one of the key factors
is keeping the machine clean to avoid contamination and staining.
4.1 MAINTENANCE REPLACEMENT COMPONENTS
Component Recommended replacement frequency
UV lamp
(Chapter 6.1 [14]) Every 6 months or as required
Filters*
(Chapter 6.1 [12]) Every 6 months or as required
Hot tank
(Chapter 6.1 [31]) Replace every 5-6 years depending on usage
Ice detection probes
(Chapter 2.4 [S3/S4/S5]) Verification every 6 months, clean or replace
Sparkling level probe
(Chapter 2.4 [S6])
Verification every 6 months, clean or replace
*Number and type of filters are dependent on the incoming water conditions
WL7 FW is equipped with labels to help correctly identify the components, replace these labels
when damaged. Use only Waterlogic replacement parts that can be obtained from Waterlogic or an
authorized Waterlogic distributor, failure to do so will void the warranty.
i