WL100
Manual Page 40 Revision: 1‐14‐2019
Heater Test
16.
Always ensure tanks are full of water before turning on the Heater or the overload (high limit) will
open and require manual reset. It will take the Heater approximately 10 minutes to heat the
water from ambient 24°C (75
°
F) to the factory set point of 85°C (185° F). Dispense a cup of hot
water to ensure the temperature/odor/taste is acceptable.
WARNING!
HOT WATER. Unit produces Hot Water up to 87°C (189°F).
Water above 52°C
(125
o
F) can cause severe burns or scalding. Hot water should be dispensed carefully into insulated
container to avoid injury.
