WaterLogic escowa Purus iQ3, Руководство по обслуживанию

Страница: 26 / 36

10. Water and CO
2
10.3 CO
2
connection
Guide to setting the valve for desired
pressure:
Optimal CO
2
pressure for the iQ3 is between
3 bar and 5 bar.
Please note that the CO
2
Pressure must
always be at least 0.5 bar more than the
water pressure.
10.4 CO
2
of systems and connection
CO
2
refillable system for commercial CO
2
bottles.
Items required:
• 1 pressure - reducing valve (see picture)
• 3 m hose 8 mm.
• 1 adapter 4 mm to 8 mm.
It is possible to supply CO
2
to the iQ3 using
refillable commercial CO
2
bottles. To allow for
larger CO
2
capacities. So that: 3 kg, 6 kg, 10 kg
refillable bottles can be used, which need to be
stored externally to the equipment. Take into
consideration the height and space required
for safe storage of the bottle, since there are
different bottle forms. Make sure the pressure-
regulating valve is closed and attach the to the
bottle. Fit the 8 mm hose on the lower con-
nection at the pressure - regulating valve, and
secure the fitting nuts bolt firmly. Fit the adapter
on the 8 mm hose, fit the 4 mm Hose between
the adaptor and the rear of the equipment, make
sure the link hose is connected at the front of the
machine. Open the CO
2
supply at that Bottle.
Examine this for leaks. Important: Secure the
bottle to prevent it from falling over.
Optimal pressure with the iQ3 is between 3 bar
and 5 bar.
Please note that the CO
2
Pressure must al-
ways be at least 0.5 bar more than the water
pressure.
Attention:
Please always work with vertical standing CO
2
bottles (don`t turn the bottle upside-down).
If you have to change somethin, pleas always
keep the position on
„OFF“ (no pressure).
Changes of CO
2
bottles only by trained persons.
26