WaterLogic escowa Purus iQ3, Руководство по обслуживанию

Страница: 18 / 36

5. Sanitation and cleaning
5.2 Sanitation
5.2.1 Sanitation with iQ - sani - clean - SHOT
(using Anolyte)
Alternative Cleaning option.
1. Fit the Anolyte kit (injector and bottle with 1 L concentrate)
instructions are included with the kit. The kit is fitted
externally between the water supply and intake valve of the
equipment.
2. Remove the Brita filter from the filter head and dispose.
3. Rinse from all 3 selections 5 L for each.
4. Turn OFF the mains water supply and hold button 1 spar-
kling water until all water is dispensed and only CO
2
gas is
dispensed. Now turn off the CO
2
supply at the regulator.
5. Turn the lever on the injector t
o “caustic solution“ and turn
ON the mains water supply.
6. Dispense 200 ml using button 3 ambient water.
7. Dispense 300 ml using button 2 chilled water
8. Briefly press button 1 Sparking water. The pump will start
and fill the carbonator.
9. When the pump stops press button 1 sparkling water and
dispense 500 ml of water. turn the injector lever to
„water“.
10.Allow 30 minutes for the internal components to soak.
(The kit can be dismounted meanwhile or left in place for
next time)
11. Rinse after the soak period, 5 L using button 3, 5 L using
button 2, and 10 L using button 3.
12.Turn the main water supply Off and turn On the CO
2
. Hold
button 1 sparkling water until all water is dispensed and
only CO
2
gas is dispensed. Now turn the Water supply on
and allow the carbonator to refill.
13.Fit a new Brita C1000 filter and flush with 1 L using
button 3 Ambient water.
Note:
10 L of chilled sparkling water should be dispensed to rinse
the carbonator, to be sure that the Anolyte is rinsed from
the system. alternativley us PH indicator strips to make sure
PH level is neutral.
The Anolyte cotains: sodium hypochlorite and
hypochlorous acid.
Chilled
Still Water
Sparkling Water
Ambient Water
18