Waterite BLACKMAXX RB8, Руководство оператора

Страница: 19 / 26

19
Waterite carries a complete line of membrane cleaning agents, as well as a Clean-in-Place (CIP)
system designed for easy cleaning of the membrane elements, without removing them from the
housings. Contact your local representative or call Waterite for pricing and availability. Your RB8
system is already pre-plumbed for a CIP connection. (Figure 3b on page 14)
pH and permeate water
The permeate water from a RO system generally has a lower pH than the feed water. This is caused
by the processes removal of particles within the elements. It is strongly recommended that a pH
balancing system be put in place to bring the pH back up to a neutral setting between 7.0 and 7.5.
Consult with your water specialist or call Waterite for pH adjustment options and equipment.
5.4 A Word on your warranty
Keep your bill of sale and your warranty certificate, included in this kit. This is needed to claim any
parts or repair service during the warranty period. Read the document completely for warranty claim
instructions.
Your RB8 BlackMaxx™ system comes with a limited one-year warranty covering materials and
workmanship for one year from date of commissioning, subject to user’s compliance with these
maintenance and operating instructions. Membranes are excluded by the warranty and the seller’s
responsibility is limited to any warranty carried by the original equipment manufacturer (OEM). It is
the purchaser’s responsibility to immediately notify Waterite in the event that defects are detected.
Seller shall not be liable for any special, incidental or consequential damages and will at its option
repair or replace any defective components. Warranty excludes o-rings, membranes, pre-filter
cartridges, freight charges, labour to remove or re-install equipment, use with feed water in excess
of 2000 TDS, use of feed water that does not meet recommended conditions or with system
alterations made without a written approval from Waterite.