Waterco INFINIUM ECO-V150, Инструкция по установке и эксплуатации, Страница: 10 / 17

INFINIUM ∞ ECO-V150 Variable Speed Pump
I pg 17
Overview
Program customization may require some trial-and-error to determine the most satisfactory
settings as dictated by the conditions. In all cases, setting the INFINIUM ECO V-150 at the
lowest speed for the longest duration is the best strategy to minimize energy consumption.
However, conditions may require running the INFINIUM ECO V-150 at a higher speed for
some duration of time each day to maintain proper filtration to achieve satisfactory sanitation.
The User Interface is located on top of the INFINIUM ECO V-150 to the right of the STEP
buttons is the OVERRIDE button. This button can be used to operate the INFINIUM ECO
V-150 at speeds outside of the normal operating schedule.
1. Press UP (+) or DOWN (-) arrows to change the DURATION
2. Press the STEP 1 key again to change the SPEED setting. The SPEED setting LED will
illuminate. The bar graph will show default SPEED for STEP 1.
3. Press UP (+) or DOWN (-) arrows to change the SPEED.
4. Press any STEP or OVERRIDE key to save the DURATION and SPEED settings for STEP 1.
If the user decides not to save the settings, pressing the STOP key will revert back to the
previously stored setting.
5. Press STEP 2, STEP 3, or OVERRIDE key. Repeat steps 1- 4 to program the corresponding
DURATION and SPEED for each button.
6. Press START to run the INFINIUM ECO V-150 based on the programmed 24 hour schedule.
7. Pressing the STOP button will stop the INFINIUM ECO V-150.
Figure 2: INFINIUM ECO V-150 Overview
NOTE: The INFINIUM ECO V-150 can only be set to operate on a 24-hour schedule. If a user
attempts to program a schedule with a combined duration for all three steps greater than
24 hours, the INFINIUM ECO V-150 software will retain the current STEP time duration only,
and will zero out the other two STEP time settings. As an example, if STEP 1 equals eight (8)
hours, STEP 2 equals nine (9) hours, and STEP 3 equals eight (8) hours – for a combined 25
hours – the INFINIUM ECO V-150 will retain the setting for the current Step being programed
and zero out the remaining two. For details regarding the set-up of the three steps as part of
a 24-hour schedule, see section 6.
NOTICE
The INFINIUM ECO V-150 can and should be optimized to suit individual pool conditions.
Specific conditions including pool size, other devices, features, and environmental factors
can all impact the optimal settings.