3
Quick Reference Guide
1. Set-up the SIM card for operation in the system.
(ref. 2.2.1 Installation: Setting up the SIM Card – Page: 9)
2. Set-up the PIN code.
(ref. 5.4.1. To Change Your PIN code – Page: 35)
3. Set-up the Identification of the alarm system.
This ‘Identification’ is a description for the system that appears at the start of every
SMS message you will receive from the alarm system.
(ref. 5.3.5 To Change The ID Of The SMS message – Page: 37)
4. Set-up the Phone Numbers that the system will send messages to. Refer to the
sections Adding/Erasing Phone Numbers from the system’s memory.
(ref. 5.3. Phone Number Memory – Page: 35)
NOTE:
To receive a FULL list of all commands, send your PIN code to the Main Unit.
Please note down the relevant details for the alarm system. i.e. The phone numbers that
have been programmed into the system and the phone number of the actual Watchguard
SMS 2010 (WGSMS2010) alarm system.
PROGRAMMED PHONE NUMBERS REFERENCE
WGSMS2010 SIM Card Phone Number
This is the phone number of the alarm system.
Stored Phone Numbers
Telephone 1
Telephone 2
Telephone 3
Telephone 4
Telephone 5
