30
2.3 Configure Arm/Disarm Confirmation
Reports
What are ‘Arm/Disarm Confirmation Reports’?
Arm/Disarm confirmation reports notify you (by SMS) if your Watchguard SMS 2010 has been armed or
disarmed.
Overview
•
By factory default the Watchguard SMS 2010 is set to ‘
do not send confirmation reports.’
•
Confirmation reports enables message sending each time the system is armed or disarmed.
Where can this feature be used?
•
In a business
: The owner of a number of stores can monitor when each store has been
armed/disarmed by the managing employee. The SMS report can also confirm if the Watchguard SMS
2010 has been armed or disarmed at an irregular time, i.e.: outside of
9am – 5pm work hours.
•
At home:
A child arriving home can disarm the alarm with a remote or by SMS. A Disarm Confirmation
SMS Report will be delivered to all mobile phones written into your Watchguard SMS 2010 system.
This feature can monitor if the child has arrived home, detailing what time the alarm was disarmed,
notifying the parents.
Watchguard SMS 2010 confirmation reports identify the number
of the user who has armed/disarmed the unit.
For example:
2.3.1 Set-up Arm/Disarm Confirmation Reports
Turn the Main control Unit
off
via the key switch.
After waiting at least 5 seconds, turn the main
control unit key switch
back to the
on
position.
The RED LED indicator on the main control unit will now flash very
quickly.
Press & hold button/s until
unit beeps.
Immediately
press and hold down the necessary button/s for your selected
plan (Button 1 = No Arm/Disarm Confirmation, Button 2 = Arm/Disarm
Confirmation Active) on a remote control until the confirmation beeps are
heard (approx 5 seconds).
COMPLETE
One beep = No Arm/Disarm Confirmation, Two beeps = Arm/Disarm
Confirmation Activated
System Disarmed.
User 3.
