10 Care and maintenance
10.1
Cleaning
Disconnect the power plug before starting any maintenance work.
The identification plate has always to be kept in easily legible condition and has
not to be removed.
Remove external dirt from time to time with some form of cold cleaner.
Use only cold cleaners to avoid damaging the paintwork or removing the lettering.
The equipment should be cleaned at regular intervals to ensure trouble-free operation.
It requires only normal cleaning (sponge, damp cloth, mild detergent) and no further
chemical additives.
Solvents
must not
be used to clean the front panel!
Keep the beaker clean. When not in use, fill with water to just below the mixer.
Cleaning mixing beakers in an ultrasonic bath, especially if plaster solvents are
also used in the beaker, will inevitably result in changes to the structure of the
beaker material and will therefore damage the mixing beaker.
18
