2.
Place the mixing materials in the beaker and mix by hand until the powder is
well mixed
with the liquid.
3. Seal the beaker with a lid.
4. Insert the beaker in the unit from below; the vacuum will be released automatically.
Hold the beaker until the vacuum builds.
5. The mixer switches on automatically (depending on the settings – see point 1) for the set
period of time.
At the end of this period, an alert signal sounds for 5 seconds, after
which the timer display (6) flashes until the main switch (2) is switched off.
6. Take hold of the beaker before you switch off the
master switch (1)
(vacuum).
After the vacuum in the beaker drops, the beaker will no longer be clamped to the unit.
16
