WÄRTSILÄ 41508, Инструкция по эксплуатации

Страница: 143 / 161

8 Check the seal
(12) a nd t he bea rings for w ear a nd da ma ge, see
pos. d) below.
9 Remove the bearings
from the shaft .
10 Press the new bearing
(13) by its inner ring with a suitable
pipe.
11 Before fitting the bearing,
oil t he colla r.
12 Turn the shaft a ccording t o Fig 19-3.
13 Fit the distance ring
a nd oil th e collar .
14 Press the bearing
(15) by its inner ring with a suitable pipe.
S ee Fig 19-3.
15 Turn the bearing housing
according to Fig 19-3 and oil the
outer surfa ces of the bearings. P ress the sha ft into th e housing by
both th e inn er a nd outer ring of the bear ing (15) w ith a suita ble pipe.
Mounting of bearings
16 Fit the bearing retainer (16).
17 The axial clearance of the shaft
sh ould be 0.05...0.10 mm . I f
necessa ry, use sh ims betw een t he bear ing (15) a nd t he reta iner (16).
18 Before re-installing the gear wheel, all contact surfaces
should be clea ned a nd oiled.
19 Re-install the gear wheel.
Pipe 1 Pipe 2 Pipe 3
Pipe 2 Pipe 1
F
F
F
A B C
Fig 19-3
3219568935
34SG-9501 Cooling Water System, V-engines