Warnock Hersey northfire dvr36h, Инструкция по установке и эксплуатации

Страница: 13 / 26

INSTALLATION INSTRUCTIONS
Cont...
PLACEMENT OF LOGSET, FIBRE COALS & EMBER WOOL
•
Place the back log at the back of the burner tray as shown, behind the two tabs on the burner
tray.
•
A bag of fibre coals and a bag of ember wool is provided with the heater.
•
Place the fibre coals on the burner tray, surrounding the burner. DO NOT place fibre coals on
the burner itself.
•
Tear ember wool into 1/2” to 3/4” diameter ember pieces and place them on the edges of the
burner so as to hide the transition between the fibre coals and the burner. Keep the embers
from obstructing the burner ports.
WARNING : Do not place the lava rocks or the embers directly on the burner ports, fire,
explosion or excessive carbon monoxide (CO) may result, causing property
damage, personal injury or loss of life.
Do not add any materials to the burner, other than the type and amount
provided by Archgard.
•
Place the “ Y ” branch as shown. The back log has a notch to accommodate the branch.
There is also a tab on the burner to locate the branch.
12
LEFT BRANCH
RIGHT BRANCH
BACK LOG
WARNING : Do not place the logs and branches in any configuration other then the one
shown, a fire, explosion or excessive carbon monoxide (CO) may result,
causing property damage, personal injury or loss of life.
LOG SETUP DETAIL
COALS
EMBERS
f i r e - p a r t s . c o m