Warmhaus VIWA 115, Инструкция по установке и эксплуатации

Страница: 4 / 48

4
We congratulate and thank you for choosing Warmhaus wall mounter
boiler which shall provide you heating and domestic hot water
comfort for years. State-of-art Warmhaus boilers, being manufactured
in compliance with standards of the European Union are also
exported to many countries. You can utilize our Authorized Technical
Service network with professional competence certification for any
ordinary maintenance needs of this product produced meticulously
with hard work. Our authorized services assure sustaining performance
of the device as they shall always provide original spare part services.
Please read this manual thoroughly to use your boiler economically,
comfortably and efficiently, and store to refer when needed.
It is recommended for efficient use to have assembly done by an
authorized dealer approved by the local gas authority and which has
the competence and experience for assembly.
1.1. GENERAL WARNINGS
This manual is an integral part of the product, and must be delivered
to the new user in case of handover of the appliance. The manual
shall be preserved properly and kept in the way to be referred as it
contains significant information about use as well as installation of the
appliance.
Heating and Domestic Hot Water installations shall be
projected and implemented a competent and approved
engineering company meeting the criteria prescribed by laws,
by observing the current legislation in force.
Installation and maintenance shall be carried out by the
competent personnel having sufficient knowledge in the
installation industry and professional competence certification
in accordance with the legislation in force and in line with the
directions of the manufacturer. Hazards which may cause injury of
persons, other living beings (animals, plants) and damage to goods
may be caused by wrong installation, for which the manufacturer
cannot be held responsible.
Natural gas installation project; shall be carried out by one
of the dealers authorized by your local gas authority.
Attention! Please note & read the warning and informations on the
boiler. Incorrect operation of the boiler can cause significant damage.
For Warmhaus wall-mounted boilers; commissioning, adjustment,
maintenance and cleaning must only be carried out by a specialist OR
approved service by Warmhaus!
When faults occur in the heating system, the plant must be stopped
and damaged parts should only be replaced by an authorized
workshop.
The accessories used must correspond to the technical rules and the
relevant parts must be approved by the manufacturer in connection
with the Warmhaus wall-mounted boiler.
Only APPROVED & ORIGINAL spare parts should be used.
Bolts sealed with paint strictly forbidden to open!
The boiler must not be used by children younger 8 years or
invalid persons without supervision.
These seals provide evidence that the replacement of bolts required
for safe operation. If the seals are damaged, the guarantee of the
device will come to an end!
1.2. TERMS AND CONDITIONS OF WARRANTY
The manufacturer may not be held responsible for any
faults caused by noncompliance to the legislation and
standards in force and information provided in this manual
(and information and instructions provided by the manufacturer in
any case), within or out of the scope of the contract, and this also
constitute reason for termination of warranty of the appliance.
Only Warmhaus Authorized Service is authorized to carry out
electrical connection of the boiler and to energize the boiler.
In case of any material, design or installation faults occurred within
the warranty period, maintenance and operation shall be carried out
without any charge of labor or spare parts.
(Also see: 3.5 MATTERS TO PAY ATTENTION FOR GUARANTEE
CONDITIONS)
This appliance should only be used for its designed intended
purposes (to be used in closed-circuit heater installation and
production of open circuit domestic hot water production).
. All kinds of other uses are not suitable as well as may create a
potential danger.
Manufacturer shall not be responsible for damages
occurring due to interventions, false installation and initial
starting performed by unauthorized persons and warranty
scope shall be void. As the Combi is an appliance having heating
system, domestic hot water, natural gas/LPG and electrical
connections, do not make and have any interventions made without
the authorized service
appliance maintenance operations should be performed by
the authorized and competent technical personnel, and
Warmhause Authorized Technical Service Centers constitute
assurance for quality. WARMHAUS is not responsible for damages
arising from repairs, part replacements and maintenance performed by
third persons and companies and combi remains out of the warranty
scope under such conditions.
This appliance has been manufactured to be installed in the
country specified on its technical registration label. Installing
the appliance in any other country than those specified on
the plate may cause damage or injury to persons, animals and goods.
WARMHAUS declares that Viwa 90, Viwa 115, Viwa 125 & Viwa 150
boilers comply with the essential requirements of the following
directives:
- Gas Appliances Regulation (EU) 2016/426
- Boiler Efficiency Directive 92/42/EEC
- Electromagnetic Compatibility Directive 2014/30/UE
- Low Voltage Directive 2014/35/UE
- Ecodesign Directive 2009/125/EC
- Regulation (EU) N. 813/2013 - 811/2013
Manufacturer: Warmhaus Isıtma ve Soğutma Sistemleri Tic. A.Ş. Bursa
Organize Sanayi Bölgesi Park Cad. No:10 16140 Nilüfer-Bursa / Turkey
WARMHAUS A.Ş. reserves the right to make all kinds of technical and
commercial modifications without notice, and disclaims any liabilities
arising out of printing and spelling mistakes.
1. DEAR WARMHAUS CUSTOMER