W&H Lisa VA131-17, Инструкция по эксплуатации

Страница: 60 / 140

60 LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
Sterilization cycles
FILLING THE CLEAN WATER TANK
1
Switch the sterilizer ON and remove the tank filling cover-cap.
2
Fill the clean water tank with distilled or demineralized water
until the sterilizer makes a sound. See "Technical data" on
page 123 for the tank volume.
3
Reposition the tank filling cover-cap.
INSERTING THE CHAMBER RACK INTO THE STERILIZER
CAUTION! Risk of burns. Before touching the chamber rack
or contents, ensure the sterilization chamber is not hot.
1
Open the chamber door and align the chamber rack at the
center/bottom of the chamber.
2
Push the chamber rack gently into position until it clicks
into place.
3
Insert cassettes horizontally or vertically, or insert trays.
See "Load maintenance and preparation" on page 57 for
load requirements and "Chamber accessories" on page 18.
4
Close the door.
5
Turn the sterilizer switch ON: after the initialization the
homepage appears.
GENERAL RECOMMENDATIONS
Follow these recommendations to obtain the most from the drying:
n
Ensure the paper side of the sterilization bags faces up, and
that the space in-between bags is enough.
n
To enjoy the full benefit of short cycle times when only one
tray is used, always place the load on the upper tray of the
chamber rack and remove all other trays from the chamber.
Sterilization cycle description
AVAILABLE STERILIZATION CYCLES
See "Sterilization cycles" on page 116 for the full list of key program
features, including sterilization time, temperature and
recommended load type.
AVAILABLE ECO DRY MODES
Icon Mode Description
ECO
DRY
plus The drying time is automatically adjusted to the shortest
possible for the total amount of load: the smaller the load, the
faster the cycle. It ensures perfect drying of standard loads.
ECO
DRY The drying time is automatically adjusted to the total amount of
load. It is longer than the ECO DRY plus mode.
It is useful with those particular loads that require an extended
drying time (suggested for container load).
ECO
DRY
+25% The drying time is automatically adjusted to the total amount of
load with a 25% of additional drying duration.
ECO
DRY
+50% The drying time is adjusted to the total amount of load with a
50% of additional drying duration.