64
LISA | Instructions for Use | VA131 2019 ENG Rev06 | 16/04/2020 | © 2020 W&H Sterilization Srl
Sterilization cycles
PROGRAM A SEQUENCE OF CYCLES TO RUN AUTOMATICALLY
It is possible to program the sterilizer in such a way that a
sequence of cycles runs automatically at a preset date and time
(e.g. if you want to run a vacuum test plus a HELIX test in the early
morning before office hours). Maximum two cycles can be
programmed.
To program the sterilizer proceed as follows:
1
Load the chamber and close the
chamber door.
2
On the homepage tap
>
>
>
3
Tap
to add a cycle to the list
above.
4
Tap
and then the cycle you want
to add.
5
Tap
: the cycle is automatically
listed in the previous page.
6
Tap the date/time to set the start of
the cycle.
Содержание Lisa VA131-17
Страница 1: ...VA131 17 VA131 22 Instructions for Use VA131 2019 ENG Rev06 ...
Страница 2: ......
Страница 139: ......
