Wallenstein BXT36S, Руководство оператора

Страница: 51 / 72

9.6 Battery Maintenance
The battery provides power to the electrical components on the
machine and the engine.
9.6.1 Battery Safety
WARNING!
Warm the battery to a minimum
of 60 °F (16 °C) before charging
it. Attempting to charge a frozen
battery can cause it to explode. An
explosion can cause serious injury or
death from projectiles, extreme heat,
chemicals, and loud noise.
W030
WARNING!
Wash your hands thoroughly after handling a
battery. Avoid contact with the battery posts,
terminals, and related accessories. They contain
lead and lead compounds that are known
to cause cancer and birth defects or other
reproductive harm.
W031
WARNING!
Wear the necessary PPE and handle batteries
carefully. The electrolyte in the battery is
poisonous and very corrosive. If electrolyte
touches skin, eyes, or clothing it can cause
severe burns or other personal injury. If you
touch battery electrolyte, get immediate medical
attention.
W020
WARNING!
Do not let metal objects touch the battery
terminals. Cover the battery terminals when
servicing the battery or the drive-belt guard is
removed. Electricity can arc from the battery
terminal to the metal object and cause a fire
or explosion. An explosion can cause serious
injury or death from heat, impact, and chemical
hazards.
W021
WARNING!
Keep the end of a disconnected battery cable
away from the battery. Electricity can arc from
the battery to the end of a battery cable and
cause the battery to explode. An explosion can
cause serious injury or death from heat, impact,
and chemical hazards.
• Keep all sparks and flames away from batteries. Electrolyte
fumes are explosive.
• Do not jump start a frozen battery. The battery can explode.
• Wear the appropriate gloves and protective eye wear, or a
face shield when you work with or near batteries.
• Use a battery carrier to lift the battery or put your hands on
opposite corners of the battery. Keep the battery level to
avoid spilling acid through the vents.
• Avoid contact with battery electrolyte:
• External contact : flush immediately with water.
• Eye contact : flush with water for 15 minutes. Get
medical attention and clean any spilled electrolyte
immediately.
• Disconnect the battery ground cable before servicing any
part of the electrical system. A spark or short circuit can
cause personal injury.
9.6.2 Remove the Battery
1. Disconnect the battery cable from the negative (–) battery
terminal.
2. Disconnect the battery cable from the positive (+) battery
terminal.
3. Remove the battery hold-down bracket.
4. Remove the battery from the machine.
Use a battery carrier to lift the battery or put your hands on
opposite corners of the battery. Keep the battery level to
avoid spilling battery acid through the vents.
9.6.3 Install the Battery
1. Put the battery in the machine.
2. Install the battery hold-down bracket.
Make sure that the battery cannot move.
3. Connect the positive (+) battery cable (usually red) to the
positive (+) battery terminal.
4. Connect the then negative (–) battery cable (usually black)
to the negative (–) battery terminal.
5. Apply a coat of dielectric grease or petroleum jelly to each
battery terminal.
BXT36S
Wood Chipper
Service and Maintenance
51