First Time Installation - continued
10
Getting Started
When the HD PVR is first powered up, please wait
until the unit has initialized.
Ensure that the aerial is connected before carrying
out the first time installation. When the HD PVR is
operated for the first time, an installation wizard is
employed to guide you through the set up process.
First the Menu Language needs to be selected,
followed by the Country and then the TV Type.
Select the TV type and then press the OK button.
By pressing the “ ”/“ ” buttons select the Tv type you
want to set and press OK button. Afterwards, “Select
HDMI resolution” OSD will appear on the screen.
Select the HDMI resolution using the left and right
arrow buttons and then press the OK button.
You will then be asked “Do you want to start an
automatic channel scan?” Press the OK button to
start the automatic channel search. The unit will
automatically find the channels and store them.
• To start installation process, select Yes by using
“ ”/“ ” buttons and then press the
OK
button.
•
The unit will start to search available stations. The
progress bar will move along the line. You should
allow the HD PVR to complete the search to store
all available stations.
Note: You can press MENU button to cancel.
Changing Channels
• You can change channels with the following
methods.
• You can press the numeric buttons (0–9) to directly
enter the channel number. You can press numeric
buttons consecutively to enter two or more digits.
• Press the
P +/ P -
buttons to move up or down to
the next available channel.
NOTE:
You can press
OK
button to display the channel list.
Volume Up / Down
• You can increase or decrease the volume by using
V+ / V-
buttons.
• The volume level selected will remain set, even
when the receiver is turned off and on again, until
you change volume again.
• The audio volume adjustment for the receiver is
independent of the volume control on your TV set.
IMPORTANT:
You should be careful that both
volume controls are kept within reasonable levels
so that when switching on, or when first turning on
your TV set, the sound level is not too high.
Mute
• You can press
to mute the sound of your set
top box. The sound will be muted once this button
is pressed.
• To cancel mute, you can press
button again or
use the
V +/-
buttons.
