27
12.3 Summary of adjustable settings on the gimbal
Motor
Motor adjustment in the event of error
(camera shake)
Follow mode setting
Pan and tilt mode
Roll axis calibration
Calibrating the gimbal
Return to factory
settings
Return to factory settings
12.4 Motor setting
If the gimbal shakes after the axes have been balanced, this means
that the motor power has been set too low to support the camera.
- To adjust the motor power, select the axis and make additional adjust-
ments.
- Change the number in the corresponding direction.
- Confi rm the choice at the top right.
- If the choice is correct, the gimbal will stabilise the camera correctly.
- If any vibrations and sounds occur, this means the motor power has
been set too high.
- Reduce the number slightly and reconfi rm the choice
12.5 Follow speed
- If necessary, the speed of the pan movement can be adjusted.
Choose between 10 and 100
12.6 Roll axis calibration
- automatic calibration of the gimbal.
- manual setting not possible
12.7 Return to factory settings
- return to factory settings
