23
Procedure:
1) After switching it on, you can adjust the parameters for the axis using the corresponding buttons
(fi gure). When in setting mode, the LED will fl ash.
2) If the rotation/swivel/tilt axis moves from side to side, move the joystick up to select a higher value
for the parameters.
3) If the motor has registered that the handle is being held, move the joystick down to lower the value
for the parameters.
4) As soon as the tilt lever can no longer be seen, let go of the button and go to the interface to save
the parameters.
7. Function
7.1 Indicator light
Function button
Set axis
Tap the button
fi ve times
Adjust the rotation axis
Tap the button
six times
Adjust the swivel axis
Tap the button
seven times
Adjust the tilt axis
JoystickD
irection
Up
Down
Left
Down
Up
Left
Ringt
Ringt
Explanation of joystick control
Realize other functions
Switch the working mode
Power on / off
Identify the current mode of the
gimbal by the indicator lights
Function Button
Indicator light
Indicator light
Joystick
down
Joystick up
Blue LED fl ashes once
The device is in swivel mode
Blue LED fl ashes twice
The device is in swivel and tilt mode
Blue LED remains lit
Gimbal installation mode
Blue LED fl ashes
constantly
Installation failed/malfunction
Blue LED fl ashes three
times
Standby mode
Red LED fl ashes three
times
Low battery
Red LED lights up
Switch off
Moving the joystick:
down to lower the parameters
up to increase the parameters
