Waldorf Q Rack, Руководство пользователя

Страница: 127 / 174

Sound Parameters – Envelopes
127 Waldorf Q User’s Manual
Loop All
The Loop All envelope type is similar to the Loop S1S2 envelope type but it loops through all
envelope stages as long as a note is held. This means that it goes through all envelope stages first and
if it ended with the
Release
phase, the envelope restarts from zero and goes through all its phases
again. As soon as the note is released, the looping stops and the envelope goes into its
Release
phase.
Attack Decay
Sustain
Release
Key pressed Key released
Time
Level
100%
Attack Level
Sustain 2
Decay 2
Loop
Picture 43: Loop All Envelope
Attack 0…127
Determines the attack rate or amount of time it takes for a signal to go from zero to Attack level.
Attack Level
0…127
Controls the level where the
Attack
phase ends and the
Decay
phase starts.
Decay
0…127
Determines the d ecay rate or amount of time it takes for a signal to reach the Sustain level. This
phase is also used in the loop to go from
Sustain 2
to
Sustain
.
Sustain
0…127
As soon as the Sustain level is reached, the envelope proceeds with the second Decay/Sustain pair
as explained below.
Decay 2 0…127
Determines the decay rate or amount of time it takes for a signal to reach the
Sustain 2
level.
Sustain 2
0…127
Sets the second Sustain level. As soon as this level is reached, the envelope goes into the Release
phase.
Release
0…127
The Release phase is used while the note is pressed to form the last stage before the loop restarts with
the Attack phase. When the note is released, the loop stops and the Release phase is used to fade the
envelope to zero.