Waldorf Q Rack, Руководство пользователя

Страница: 121 / 174

Sound Parameters – Arpeggiator
121 Waldorf Q User’s Manual
Arp Steplen
˜
/
¯
…
˛
Arp Steplen
01[˚˛ ˛ ˛ ˛˚˛ ˛ ˛ ˛˚˛ ˛ ˛ ˛˚˛ ˛ ˛ ˛˚˛ ˛ ˛ ˛˚˛ ˛ ˛ ˛˚˛ ˛ ˛ ˛˚˛ ˛ ˛ ˛]
Changes the length of the note of a particular step. The overall length of the arpeggio depends on the
Length
setting. If
Length
is set to legato ,
Arp Steplen
doesn’t have any effect at all. Also, if
Length
is set to a very small value, Arp Steplen might not have an audible effect when you set it to a
negative value. You can create very nice staccato and legato effects with this parameter.
• If
˜
is selected, the notes of this step are hold until the next step has to be played. Empty
steps force to still hold the notes of the step that was set to legato.
• Values pointing to the left (
˙
,
˘
,
¯
) shorten the length of the notes of this step.
• If a vertical line (
˚
) is shown, the step is held as long as set in the Length parameter.
Values pointing to the right ( ¸ , ˝ , ˛ ) make the notes of this step held longer.